We Import,and Export too

We buy and sell a wide range of semiconductors & passive components:

- ICs ( TTL, CMOS, DRAM, SRAM, EPROM, LINEAR,REGULATOR, ...etc)
- Transistors ( Power, Mosfet, ...etc)
- Diodes ( Switching, Zener, ...etc)
- Capacitors ( Ceramic, Chip,...etc)
- Fuses ( Slow, fast, ...etc)
- Switches ( Rocker, Slide, ...etc)
- Relays ( PCB, Reed, Power, ...etc)
- Resistors ( Carbon, Metal, ...etc)
- LEDs ( 3mm, 5mm, 10mm, ...etc)
- Displays ( 0.3", 0.36",...etc)
- Crystals ( SMD, Low Profile, ...etc)
- Filters ( Ceramic, SAW, ...etc)
- Resonators (Ceramic, SAW, ...etc)
- Sockets (Dip, PLCC, ... etc)
- Batteries (Lithium, Ni-Cd, ...etc)
- Motors (DC, AC,...etc)
- Lamps (Miniature, Neon, ...etc)
- Coils (Chip, Choke,...etc)
- Jacks (AC, DC, RCA, ...etc)

Part number: OPA4379

Category:
Analog & Mixed-Signal Processing
-> Amplifiers
-> Operational Amplifiers
-> Rail to Rail

Description:
The OPA379 family of micropower, low-voltage operational amplifiers is designed for battery-powered applications. These amplifiers operate on a supply voltage as low as 1.8V. High-performance, single-supply operation with rail-to-rail capability makes the OPA379 family useful for a wide range of applications.

In addition to microSize packages, the OPA379 family of op amps features impressive bandwidth (90kHz), low bias current (25pA), and low noise (80nV/Hz\) relative to the very low quiescent current (5.5μA max).

The OPA379 (single) is available in SC70-5, SOT23-5, and SO-8 packages. The OPA2379 (dual) comes in SOT23-8 and SO-8 packages. The OPA4379 (quad) is offered in a TSSOP-14 package. All versions are specified from -40°C to +125°C.

Packaging information:
Part number Package
OPA4379
OPA4379AIPWR TSSOP
OPA4379AIPWRG4 TSSOP
OPA4379AIPWT TSSOP

Company: Texas Instruments, Inc

Part number: NCS2200A

Category:
Analog & Mixed-Signal Processing
-> Comparators

Description:
The NCS2200 series is an in industry first sub-one volt, low power comparator family. These devices consume only 10uA of supply current. They are guaranteed to operate at a low voltage of 0.85V which allows them to be used in systems that require less than 1.0V and are fully operational up to 6.0V which makes them convenient for use in both 3.0V and 5.0V systems. Additional features include no output phase inversion and overdriven inputs, internal hysteresis, which allows for clean output switching, and rail-to-rail input and output performance. The NCS2200 series is available in the tiny SOT23-5 and SOT23-6 package. There are eight options featuring two industry standard pinouts. Additionally, the NCS2200 and NCS2202 are availabale in the SC70-5 package. The NCS2200 is also available in the tiny DFN 2x2.2 package. The NCS2200A is available in UDFN 1.2x1.0 package. The NCS2201/3 series in the SOT23-6 package features an enable function, which can be externally controlled. When the enable pin is pulled low (output tri-state mode), current consumption is typrically 0.3uA. This allows the user to implement these devices in power sensitive applications such as portable electronics.

Packaging information:
Part number Package
NCS2200A
NCS2200AMUT1G UDFN

Company: ON Semiconductor